Minimum Length

Stroke Length

Total Length

Max Charging Pressure

Max Piston Rod Velocity

Interchangeable With :
KALLER

Nitrogen Gas Spring

1666 Products

Basic

Super compact gas springs provide extreme forces with minimal cylinder diameters and high stroke rates.
• Force: 4,250 - 183,000 N (955 - 41,140 lbf)
• Cylinder Diameter: 25 - 150 mm (0.98 - 5.85 in)
• Stroke Length: 6 - 65 mm (0.23 - 2.54 in)

Super compact gas springs provide extreme forces with minimal cylinder diameters and high stroke rates. Equipped with a side port plate.
• Force: 10,600 - 183,000 N (2,400 - 41,140 lbf)
• Cylinder Diameter: 38-150 mm (1.5-5.91 in)
• Stroke Length: 6-65 mm (0.24-2.56 in)

Super compact gas springs equipped with a side port mount for use in a hosed/linked system.
• Force: 47,000 - 183,000 N (10,570 - 41,140 lbf)
• Cylinder Diameter: 75 - 150 mm (2.93 - 5.85 in)
• Stroke Length: 10 - 65 mm (0.39 - 2.54 in)

Compact Xtreme CX gas springs provide extreme forces and allow for higher pressures and high stroke rates.
• Force: 5,100 - 19,200 N (1,150 - 4,320 lbf)
• Cylinder Diameter: 32 - 50 mm (1.25 - 1.95 in)
• Stroke Length: 10 - 80 mm (0.39 - 3.12 in)

Compact Xtreme CX gas springs provide extreme forces and allow for higher pressures and high stroke rates. Equipped with a side port plate.
• Force: 5,100 - 19,200 N (1,150 - 4,320 lbf)
• Cylinder Diameter: 32 - 50 mm (1.25 - 1.95 in)
• Stroke Length: 10 - 80 mm (0.39 - 3.12 in)

Ejector Pin with rounded top for panel lifting, fully adjustable force, interchangeable with mechanical spring plungers.
• Force: 57- 1,700 N (12.81 - 382 lbf)
• Cylinder Diameter: 16 - 24 mm (0.62 - 0.94 in )
• Stroke Length: 10-125 mm (0.39-4.92 in)

Enhanced

Short height version of the TU Series with tapped base mounting holes and side charging port for hose system connection.
• Force: 4,700 - 15,000 N (1,055 - 3,375 lbf)
• Cylinder Diameter: 45 -75 mm (1.77 - 2.95 in)
• Stroke Length: 6 - 125 mm (0.24 - 4.92 in)

Innovative Low Contact Force gas springs, 100% interchangeable with ISO gas springs. Reduce shock loads and noise levels.
• Force: 7,400 - 75,000 N (1,665 - 16,860 lbf)
• Cylinder Diameter: 50 - 150 mm (1.97 - 5.91 in)
• Stroke Length: 12.7 - 300 mm (0.5 - 11.81 in)

Small repairable spring offering different force levels, high strokes per minute, with or without threaded cylinders.
• Force: 500 - 2,000 N (110 - 450 lbf)
• Cylinder Diameter: 25 - 32 mm (0.98 - 1.26 in)
• Stroke Length: 10 - 125 mm (0.39 - 4.92 in)

Mould Temp gas springs are compact and powerful piston rod sealed gas springs, which can be used up to 120°C.
• Force: 420-9,200 N (95-2,068 lbf)
• Cylinder Diameter: 16-50 mm (0.63-1.97 in)
• Stroke Length: 10-80 mm (0.39-3.15 in)

Small rod sealed spring offering high force per area, different force levels and high stroke rates.
• Force: 130-900 N (29-202 lbf)
• Cylinder Diameter: 12-19 mm (0.47-0.75 in)
• Stroke Length: 7 - 125 mm (0.27 - 4.88 in)

Speed Control reduce or eliminate blank holder bounce associated with increased return stroke speeds.
• Force: 7,400 - 50,000 N (1,665 - 11,250 lbf )
• Cylinder Diameter: 75-150 mm (2.93-5.85 in)
• Stroke Length: 80 - 300 mm (3.12 - 11.7 in)

Compact

Inch threaded cylinder, with same dimensions as TU.
• Force: 2,650 N (600 lbf)
• Cylinder Diameter: 38 mm (1.5 in)
• Stroke Length: 12.7 mm (0.5 in)

Short height version of TU.
• Force: 7,400 - 75,000 N (1,660 - 16,860 lbf)
• Cylinder Diameter: 50 - 150 mm (1.97 - 5.91 in)
• Stroke Length: 12.5 - 250 mm (0.49 - 9.84 in)

Metric threaded cylinder, with same dimensions as TU.
• Force: 2,650 N (600 lbf)
• Cylinder Diameter: 38 mm (1.5 in)
• Stroke Length: 12.7 - 125 mm (0.5 - 4.92 in)

Threaded stud, with same dimensions as TU.
• Force: 2,650 N (600 lbf)
• Cylinder Diameter: 38 mm (1.5 in)
• Stroke Length: 12.7 - 100 mm (0.5 - 3.94 in)

The original standard gas spring, setting the ISO standard for gas springs as well as the Ford WDX and GM gas springs standards.
• Force: 2,650 - 106,000 N (600 - 23,830 lbf)
• Cylinder Diameter: 38 - 195 mm (1.5 - 7.68 in)
• Stroke Length: 10 - 300 mm (0.39 - 11.81 in)

Fully interchangeable with TU. Meets the Renault standard.
• Force: 106,000 N (23,830 lbf)
• Cylinder Diameter: 194.9 mm (7.67 in)
• Stroke Length: 25 - 300 mm (0.98 - 11.81 in)

Miniature

Optimized for high return speed, 2 m/s, and fully interchangeable with TU. Meets the Renault standard.
• Force: 7,400 - 75,000 N (1,665 - 16,860 lbf)
• Cylinder Diameter: 50 - 150 mm (1.97 - 5.91 in)
• Stroke Length: 25 - 300 mm (0.98 - 11.81 in)

The Power Line Heavy Duty series. Total length the same as TU, force the same as X.
• Force: 7,400 - 200,000 N (1,665 - 44,960 lbf)
• Cylinder Diameter: 45 - 195 mm (1.76 - 7.61 in)
• Stroke Length: 13 -300 mm (0.51 - 11.7 in)

The world’s shortest, strongest and most advanced rod sealed gas springs.
• Force: 1,700 - 200,000 N (382 - 45,000 lbf)
• Cylinder Diameter: 19 - 195 mm (0.74 - 7.61 in)
• Stroke Length: 7 - 125 mm (0.27 - 4.88 in)

The XF series fulfills our gas spring range for FCA Fiat-Chrysler standard 075.90.60 and part of GM standard 90.25.08.
• Force: 7,400 - 24,000 N (1,665 - 5,395 lbf)
• Cylinder Diameter: 45 - 75 mm (1.76 - 2.93 in)
• Stroke Length: 10 - 125 mm (0.39 - 4.88 in)

Based on the X series with the same features but additional total length providing a larger G1/8” charge port and deeper bottom threads.
• Force: 3,600-66,300 N (810-14,905 lbf)
• Cylinder Diameter: 32-120 mm (1.26-4.72 in)
• Stroke Length: 10-125 mm (0.39-4.92 in)

Compact and powerful, threaded stud, up to 125 mm stroke.
• Force: 9,200 N (2,068 lbf)
• Cylinder Diameter: 50.4 mm (1.98 in)
• Stroke Length: 13 - 125 mm (0.51 - 4.92 in)

loading..